telemetry

As some of you might know, netKar PRO is using a real digital dash that acquires telemetry data.

For this reason you can use AIM Race Studio 2, the same telemetry software used in real life!



The steps to follow are few and extremely easy:
1) do few laps in your circuit (at least one complete lap after the installation lap)
2) in the race studio analysis (the AIM telemetry software) select from the menu file>Import netkar file and select your {my documents}\netkar pro\aim\telemetry_dump.nkt
3) double click on the new telemetry data just imported

You can download the AIM Race Studio2 telemetry software for free from the producer website

In the nkpro manual ({nkpro folder}\manual\netKar PRO Manual.pdf) you will find a very nice guide about how to use telemetry in nkPRO.

It has problem with windows 7 64 bit..When i import i take the message that this program stoped to work...I cant find any solution..(Even though it sais in some releases it supports win 7 64 bit)
I run it with administrator proviledges nothing,i run it with xp compatibility nothing..(i know that in xp works fine but in 7...)

About telemetry, one question.
Is possible that there's not type temps showed ?

no. as Kunos said some time ago, probes to log in the telemetry tyre temperatures are quite expensive, therefore are not used in real life for cars simulated in nkpro.
I'm not sure if this is still true for the KS2 too. For sure it was not possible to get those values for all the other cars.
The only way, is, just like in real life, to read temperature values in the setup once you go back to the box. Not really handy the most of the time, but this is the reason.

No, in KS2 there're not tyre temps in AIM, i've allready check.
In real life tyre temps during a lap are not "readable", of course.
But all the engineer has the tyre temp curvers of any kind of tyres ... so when the car return to box engineer can check the temp and decide what change in setup looking the type temp curves.

For example, from LiveforSpeed:
http://en.lfsmanual.net/wiki/File:Setup10.jpg

Do u understand what i mean ?

We still have problems with AIM Race Studio in windows 7... Although we downloaded the version for windows 7 still wont start.
Any suggestions ?

I use win7 32bit ant it work fine !

The thing for me is that it seems to work fine until the moment i press import. After that it crashes and i don't know why. That is why i ask for help if someone had the same problem with me and how to fix it...

Have u tryed do some laps with differents cars ?

As a matter of fact i ddn't because i was trying to do what Andrea L wrought to instructions
[2) in the race studio analysis (the AIM telemetry software) select from the menu file>Import netkar file and select your {my documents}\netkar pro\aim\telemetry_dump.nkt]

So when i try to import that file it crashes. But i will try to do some laps with different cars to see if it works

Andrea Lojelo wrote:
The steps to follow are few and extremely easy:
1) do few laps in your circuit (at least one complete lap after the installation lap)
2) in the race studio analysis (the AIM telemetry software) select from the menu file>Import netkar file and select your {my documents}\netkar pro\aim\telemetry_dump.nkt
3) double click on the new telemetry data just imported

you need to do at least a lap otherwise Race Studio crashes because doesn't get any data.

If feel a little bit stupid ....but It worked ....
Thank you very much !!!

Does anybody know how to get a track map in AIM? Thanks.

In Race Studio 2
Menu Map>new

Then you can see where you are in the map pressing the track map icon on the top right (Show Track Map) or pressing SHIFT+F1

Andrea Lojelo wrote:In Race Studio 2
Menu Map>new

Then you can see where you are in the map pressing the track map icon on the top right (Show Track Map) or pressing SHIFT+F1

Thank you sir.

Does anybody have a AIM trackmap of Road America? When I load mine it looks all wonky.

does anybody know how I can compare telemetry data ?

Like in Ferrari virtual acadamy, or isnt it possible to load two or more telemetry files ?

Just select 2 different files, and you will have the 2 graphs one above the other.

You will find a lot of info also on manuals\netKar PRO Manual.pdf. There is a nice section on how to use the telemetry.

I never saw that manual
I only knew the user guide...woow the manual is huge, thanks andrea , will be my lecture for the next days

PS: can you fix the live timing ?