Calibration problems in netkar settings...

I m trying to calibrate my wheel in netkar but when i hit the "wheel" option nothing happens :s

which wheel you have first of all???

I use Fanatec gt2 911 and clubsport pedals.
I cant remember having this issue before.
My wheel works fine when i test in Fanatec driver settings but it looks like
netkar want or dont connect with it. never happen before :/

ops most of us having g25 g27...
first time listen this issue....
can you have a look on the control.ini in the document-netkarpro-cfg-control...you can see what is detect in game..and all parameter...or wait for a better helping...sorry

try to delete the {documents}\netkar pro folder. Don't forget to do a backup of the drivers and licences folders before.

its no problem with the wheel, press "CTRL" on the Keyboard, while you have your wheel in the center position (netkar running)
or what do you mean with calibration ?
maybe i can help you, i own a fanatec wheel,too

Hey, thx for the response. i have just re install windows 7 and all from netkar have been deleted. I just install the game and when i click on netkar pro ikon and go to control setup and choose "wheel" then nothing happens. Normally u will get the message to rotate your wheel 90 deg etc :/
Very strange, my wheel works fine when i test this on Fanatec driver settings.

Cheers

giancarlo graziano wrote:ops most of us having g25 g27...
first time listen this issue....
can you have a look on the control.ini in the document-netkarpro-cfg-control...you can see what is detect in game..and all parameter...or wait for a better helping...sorry

Here


[HEADER]
VERSION=2

[CONTROLLERS]
CON0=Porsche Wheel

[STEER]
JOY=0
AXLE=0
FF=1
SCALE=1
FACTOR=1
LOCK=900

[THROTTLE]
JOY=0
AXLE=2
MIN=0
MAX=-0.9961

[BRAKES]
JOY=0
AXLE=2
MIN=0
MAX=0.9961
USELINEAR=1

[CLUTCH]
JOY=1
AXLE=-2
MIN=0
MAX=0

[BALANCEUP]
JOY=0
BUTTON=-1

[BALANCEDN]
JOY=0
BUTTON=-1

[GEARUP]
JOY=0
BUTTON=5

[GEARDN]
JOY=0
BUTTON=4

[PADDLEUP]
JOY=0
BUTTON=5

[PADDLEDN]
JOY=0
BUTTON=4

[GLANCE]
JOYLEFT=0
JOYRIGHT=0
BUTTONLEFT=2
BUTTONRIGHT=1

[STARTER]
JOY=0
BUTTON=3

[HANDBRAKE]
JOY=-1
BUTTON=0

I dont understand the problem...
Is the wheel recognized by netkar ?
What i did was to go into settings choose my wheel from the list and assigned the axis to the game and the buttons...
Then in settings i set steering lock to 400 degrees, because i change the lock on the wheel... And ifs not centered i press ctrl ingame while wheel is centered
You can even set min and max points in netkar for the axis, so i think everythin is covered
Maybe its just me but i dont understand the problem

hehe yes you selecting wheel then u have to assigned all buttons etc but i dont get that far. when i hit the wheel option noting happens :S

press steer on the left side and then choose the axis on the right side
so for me everything works.

when i did that with the controller setup it didnt work neither for me because wheel and pedals are connected seperatly
think thats the problem

okey, i can test it out but mine isnt connected separably and i never had this issue before. Tryed to re install netkar.
Didnt work either :/

no need to reinstall it, its very simple i mean
choose the device, move the axis and assign it, same with the buttons

i had already re install it :p but u are right it works fine now
Thank you
Btw: can u post your setup for this wheel?
And do you know what the small wheel is under the main wheel is?
Not so easy to explain but u can rotate it left and wright but dont see any difference :p

what setup do you mean ? from the wheel ingame or general ?

general is simple:
Sen: 400
FFB: 100
drift mode off
everything else to 0 or off
i would turn ABS off too

the "small wheel" is to adjust the mount for the table if you dont have your wheel hardmounted

aaa okey, i have it on a wheelstand.
i have sen on 900 everything else is identical
just wanted to know, dont know anything about this wheel.
i bought it about a month ago:)
Thx so much for your help

Cheers

btw: would be nice if u told me ingame setup to for ks2

its different from track to track, i would recomend you to start with formula 2000 and prato
http://www.wagenvoort.net/rank/setups.php here you can find some good setups.

i was thinking about force feedback setup etc
But thats maybe just a matter of taste
Btw i only use Ks2

Force feedback has to be 100 on the wheel, you should set the ffb gain in the setup lower if its to strong, but leave ffb on the wheel at 100

okey, thank you )